Curtis 1212P handleiding
Handleiding
Je bekijkt pagina 8 van 51
2 — INSTALLATION AND WIRING
1212P Manual – Sept. 2022 Return to TOC
pg. 4
2 — INSTALLATION AND WIRING
MOUNTING THE CONTROLLER
e 1212P controller can be oriented in any position, but the location should be carefully chosen
to keep the controller clean and dry. If a clean, dry mounting location cannot be found, a cover
must be used to shield the controller from water and contaminants.
e outline and mounting hole dimensions are shown in Figure 2. e controller should be mounted
by means of the two mounting holes at the opposing corners of the heatsink, using M4 (#8) screws.
Figure 2
Mounting
Dimensions,
Curtis 1212P
Controller.
131±1
72±1
113.0
54.0
9.0
9.0
38.4±1
18.2
Ø 5.0 2PL
Dimensions in millimeters
You will need to take steps during the design and development of your end product to ensure that its
EMC performance complies with applicable regulations; suggestions are presented in Appendix A.
Bekijk gratis de handleiding van Curtis 1212P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1212P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5521 MB |
