Curtis 1212P handleiding
Handleiding
Je bekijkt pagina 22 van 51
3 — PROGRAMMABLE PARAMETERS
1212P Manual – Sept. 2022 Return to TOC
pg. 18
THROTTLE MENU, cont’d
PARAMETER ALLOWABLE RANGE DESCRIPTION
Speed Limit Pot On/Off This parameter is used to enable/disable the speed limit pot. If no speed limit
pot is used, set Speed Limit Pot to Off.
Throttle Map 20–80 % The throttle map parameter adjusts the static throttle map. The parameter
setting corresponds to the throttle command at half throttle, as shown in
Figure 7.
A setting of 50% provides linear response. Values below 50% reduce the
throttle command at low throttle positions, providing enhanced slow speed
maneuverability. Values above 50% give the vehicle a faster, more responsive
feel at low throttle positions.
Tremor Suppression 0–100 % This parameter can be used to limit the controller’s response to sharp throttle
movements, such as movements resulting from hand tremors.
Larger values will provide a steadier ride, but they also result in more sluggish
response to throttle request. There is thus a trade-off between crispness of
response (low Tremor Suppression settings) and steady speed in the presence
of tremors (high settings).
Figure 7
Eect of rottle Adjustment
Parameters. ese Four
Parameters Determine e
Controller’s Response to
rottle Position, in Forward
and Reverse.
Here,
Deadband = 10%
rottle Max = 90%
Creep = 0%.
Bekijk gratis de handleiding van Curtis 1212P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Curtis |
| Model | 1212P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5521 MB |
