Crystal Video BeamLink-Ultimate handleiding
Handleiding
Je bekijkt pagina 14 van 19
22
23
RS232/RS422 transparent transmission
Name
Description
NC NC
P12V
1
2
NC NC
TXD
3
4
GND
RXD
5
6
1 3
2
456
RXD-
P12V
TXD-
TXD+
GND
RXD+
RS232
RS422
This interface defaults to RS232 function. For RS422 function, contact the
sales staff in advance for customized information!
Pin No
Name
Description
No voltage output by default
(Reserve 12V voltage output)
Transmit data TX
Ground
Receive data RX
Receive data RX-
No voltage output by default
(Reserve 12V voltage output)
Transmit data TX-
Transmit data TX+
Ground
Receive data RX+
Log in to the backplane parameter settings page to change the baud rate settings:
(For specific operating steps, refer to “Video Parameter Settings”)
Attached: Baud rate settings
Description:
Streaming Function
When the receiver is set to streaming mode, the transmitter needs to
switch to streaming mode. At this time, the word “RTSP” is displayed
on the transmitter’s OLED display, the SDI and HDMI ports at the receiver
have no video output, and the video is transmitted to the streaming media
software through the LAN port of the receiver for decoding .
In this mode,video is decoded using software .And there are lots of IP based
decoding software on market. The following is an example of common VLC
streaming media software:After the transmitter and receiver build a
network connection, the transmitter network indicator is always on,
the receiver network connection display normal; the transmitter is connected to
the HDMI or SDI video source, and the receiver’s network port is connected
to the streaming device.
Take the VLC on PC as an example. After running VLC, select to turn on
the network stream.Fill in the address “rtsp://xx.xx.xx.xx/media/live/0
where xx.xx.xx.xx is the corresponding transmitter IP address. Click “Play”
to start.
”,
Note that the transmitter must be connected to the video source, and the
IP address of the device runing VLC (such as a computer) must be
the same network segment as the IP address of the encoding board.
Otherwise, the streaming will fail.
Bekijk gratis de handleiding van Crystal Video BeamLink-Ultimate, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crystal Video |
| Model | BeamLink-Ultimate |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3546 MB |
