Handleiding
Je bekijkt pagina 10 van 72
49-1000105 Rev. 010
Door Alignment
If doors are uneven, adjust the refrigerator door.
To remove the base grille, open the doors, remove the
screw at each end of the base grille and then pull the
grille straight out.
1.Usinga7/16”socketwrench,turnthedooradjusting
screwtotherighttoraisethedoor;totheleft,to
lower it. (A nylon plug, imbedded in the threads of the
pin, prevents the pin from turning unless a wrench is
used.)
2. After one or two turns of the wrench, open and close
the refrigerator door and check the alignment at the
top of the doors.
Refrigerator Doors (on some models)
The refrigerator doors may feel different than the ones
you are used to. The special door opening/closing
feature makes sure the doors close all the way and are
securely sealed.
When opening and closing the door you will notice a stop
position. If the door is opened past this stop point, the
door will remain open to allow you to load and unload
food more easily. When the door is only partially open, it
will automatically close.
The resistance you feel at the stop position will be
reduced as the door is loaded with food.
Doors
When the door is only partially open,
it will automatically close.
Beyond this stop the door will stay open.
7/16”SocketWrench
Raise
USING THE REFRIGERATOR: Doors
Bekijk gratis de handleiding van Crosley XSS25GSKB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crosley |
| Model | XSS25GSKB |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 10044 MB |
