Handleiding
Je bekijkt pagina 27 van 80
49-1000107 Rev. 5 27
INSTALLATION INSTRUCTIONS
Installation Instructions
INSTALLING THE REFRIGERATOR (Cont.)
CONNECT THE TUBING TO THE REFRIGERATOR
(icemaker and dispenser models)
NOTES:
• Before making the connection to the refrigerator, be
sure the refrigerator power cord is not plugged into
the wall outlet.
• Before connecting the water line to the house, purge
the house line for at least 2 minutes.
• Some models have the refrigerator connection at
the water valve (Configuration 1). Other models
have the refrigerator connection at the end of
tubing located outside the compressor compartment
access cover (Configuration 2).
• On Configuration 1 Models, the
refrigeration connection is at the
water valve, remove the plastic
flexible cap, as shown here.
Water supply connection.
If you are using copper tubing, place a
compression nut and ferrule (sleeve) onto the end
of the tubing coming from the house cold water
supply.
If you are using Universal water line tubing, the
nuts are already assembled to the tubing.
Refrigerator Connection.
If you are using copper tubing, insert the end of
the tubing into the refrigerator connection, at the
back of the refrigerator, as far as possible. While
holding the tubing, tighten the fitting.
If you are using Universal water line tubing,
insert the molded end of the tubing into the
refrigerator connection, at the back of the
refrigerator, and tighten the compression nut until it
is hand tight. Then tighten one additional turn with
a wrench. Overtightening may cause leaks.
Refrigerator Connection Using the Tubing
Clamp
Fasten the tubing into the clamp provided to hold it
in position. You may need to pry open the clamp.
One of the Configurations below will look like the
connection on your refrigerator.
Universal
Water Line
Tubing
Refrigerator
Connection
&RQ¿JXUDWLRQ
&RQ¿JXUDWLRQ
Refrigerator
Connection
WARNING
Connect to potable water supply only.
A cold water supply is required for automatic
icemaker operation. The water pressure must be
between 40 and 120 psi (275-827 kilopascals).
WARNING
ELECTRIC SHOCK HAZARD
Attach tubing clamp using existing hole only. DO
NOT drill into the refrigerator.
Bekijk gratis de handleiding van Crosley XNE25JGKS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crosley |
| Model | XNE25JGKS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 11314 MB |
