Crosley CDM2450TW handleiding
Handleiding
Je bekijkt pagina 29 van 31

PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The dishwasher wont
start
The door may not be closed
properly.
Make sure that the door is closed and latched.
The power is off or not
connected.
Make sure that the power is connected and turned on.
The delay start option is
selected.
Refer to the Delay section under Controls and
indicators on page 10.
The child lock is activated. Deactivate the child lock. Refer to the Child lock
section under Functions on page 10.
The dishwasher beeps
atthe end of the cycle
This is normal and indicates
thatthe wash cycle is complete.
The rinse aid light is on The rinse aid level is low. Add rinse aid.
The dishwasher runs
toolong
The dishwasher is connected to
acold water supply.
Make sure that the dishwasher is connected to a hot
watersupply. If not, change the water supply to a hot
water source.
The cycle time varies, depending
on the soil level of the dishes.
When heavy soil is detected, the wash times will be
longer.
Depends on the option selected. Some options will add time to the cycle.
The dishes are not
cleanenough
The water pressure is too low. Make sure that the water pressure is above 20 psi.
Use yourdishwasher when water demand is low.
The inlet water temperature is
too low.
Make sure that the dishwasher is connected to a hot
watersupply. If not, change the water supply to a hot
water source.Use your dishwasher when hot water
demand is low.
Dishes are too close together. Reload the dishwasher as shown in Preparing and
loadingdishes on page 12.
Improper use of detergent. Add detergent depending on the water hardness and
washingcycle you choose. Use fresh detergent.
The selected cycle is not suitable
for the soil level on the dishes.
Choose a different cycle with a longer washing time.
The spray arms are blocked. Make sure that the spray arms are not blocked and
are free torotate.
The dishes are not
dryingenough
The rinse aid dispenser is empty
or the setting is too low.
Fill the rinse aid dispenser.
Increase the rinse aid setting.
Dishes are loaded improperly. Reload the dishwasher as shown in Preparing and
loadingdishes on page 12.
The cycle you chose did not
include drying.
Choose a cycle with drying.
28
Bekijk gratis de handleiding van Crosley CDM2450TW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Crosley |
Model | CDM2450TW |
Categorie | Vaatwasser |
Taal | Nederlands |
Grootte | 1734 MB |