Crestron ZUMMESH-JBOX-20A-PLUG handleiding

Niet gecategoriseerd

Crestron

34 pagina's

PDF beschikbaar

Handleiding

18 • Installation and Setup of Crestron RF Products Best Practices – DOC. 6689H

RF Gateway Installation

After installing and connecting each gateway, check the RF channel and change it if

needed. For more information, refer to the “Changing Gateway RF Channels” on page 27.

Installation Do’s

The physical location of the RF gateway in relation to the connected wireless devices must

be considered for a successful installation. When installing an RF gateway, adhere to the

guidelines below for optimum performance.

Place the gateway in a location as follows:

• On the same floor as the wireless devices

NOTE: For Wi-Fi networks, there should be no more than one wall between the

gateway and wireless devices. Both the thickness and material in the obstruction

determine how much signal can pass.

• Above the height of most furniture

• Away from large metal objects (such as an AV rack, television, or ducting)

NOTE: Plasma TV technology also produces RF interference.

• At least 15 feet from all other infiNET EX gateways, Zūm devices, and Wi-Fi access

points

Use the same floor plan to overlay the wireless networks in the house that is shown below.

Floor Plan with infiNET EX Gateway Overlay

Bekijk gratis de handleiding van Crestron ZUMMESH-JBOX-20A-PLUG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.