Crestron ZUMMESH-JBOX-20A-PLUG handleiding

Niet gecategoriseerd

Crestron

34 pagina's

PDF beschikbaar

Handleiding

Best Practices – DOC. 6689H Installation and Setup of Crestron RF Products • 7

Installing RF Devices

When installing RF devices, Crestron recommends that the steps be performed in the order

below:

1. Create a floor plan

2. Create a network list

3. Conduct a site survey

4. Build a channel map

5. Install and configure RF gateways

6. Verify connectivity

7. Perform post-installation checks

Creating a Floor Plan

The first step in a successful RF installation is to create a floor plan of the home or building.

This allows the user to map out where infiNET EX extended range and Wi-Fi gateways are

to be located.

NOTE: Regardless of channel assignments, all gateways and Zūm devices should be

located at least 15 feet from 2.4 GHz Wi-Fi WAPs (Wireless Access Points). This distance

can be relaxed somewhat for WAPs that transmit at lower power levels. The 15-feet

restriction corresponds to an access point that transmits at ~ +28 dBm.

Floor Plan Example

Bekijk gratis de handleiding van Crestron ZUMMESH-JBOX-20A-PLUG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.