Crestron HZ2-AUX handleiding
Handleiding
Je bekijkt pagina 54 van 113
54 • Horizon® 2 Dimmers, Switches, and Keypads Product Manual — Doc. 9243B
HZ2-KPCN Specifications
Product specifications for the HZ2-KPCN.
Product Specifications
Power Requirements
Cresnet Power Usage 2 W (83 mA @ 24VDC)
Controls
Pushbutton (9) Pushbuttons, located under the button assembly;
Pushbuttons are actuated by the button assembly that is installed
Button Assembly (1) Button assembly included;
Compatible with Style1–6 button assemblies
Setup (1) Pushbutton;
Front of the faceplate must be removed to access the pushbutton;
Can be used to set the local LED backlight color theme or calibrate the ambient light
sensor
LED Indicator and Light Sensor
LED Feedback (5) RGB LED backlights;
Supports one local color theme for all LEDs;
Supports one alternate color theme for each backlit position
Light Sensor (1) Photosensor with adjustable sensitivity;
Detects the ambient room light level to activate day or night mode and autodimming
the backlight
NOTE: Light sensor performance may be affected by obstructions placed below the keypad.
Communications
Cresnet Cresnet secondary mode
Connections
INPUT
(1 2 G)
(1) 3-pin 3.5 mm detachable terminal block;
(2) digital/analog input ports, (1) ground;
Digital Input: Rated for 0-24VDC, input impedance 200k Ohms, logic threshold
1.24VDC;
Analog Input: Rated for 0-10VDC, protected to 24VDC maximum, input impedance
200k Ohms;
Programmable 3V, 2k Ohm pull-up resistor per input
NET
(24 Y Z G)
(2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
Cresnet secondary port with hardwire parallel pass-through
Bekijk gratis de handleiding van Crestron HZ2-AUX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | HZ2-AUX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11970 MB |
