Crestron HZ2-AUX handleiding

113 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 48 van 113
48 Horizon® 2 Dimmers, Switches, and Keypads Product Manual Doc. 9243B
HZ2-SWEX Specifications
Product specifications for the HZ2-SWEX.
Product Specifications
Load Control
Load Type Incandescent, Magnetic Low Voltage, Tungsten-Halogen, Electronic Ballasts, 1/2 HP
Motors
Load Rating 10A maximum;
No minimum load
Power Requirements
120VAC, 50/60 Hz;
Requires neutral wire connection
Controls
Pushbutton (9) Pushbuttons, located under the button assembly;
Pushbuttons are actuated by the button assembly that is installed
Button Assembly (1) Button assembly included;
Compatible with Style1–6 button assemblies
Setup (1) Pushbutton;
Front of the faceplate must be removed to access the pushbutton;
Can be used to set the local LED backlight color theme or calibrate the ambient light
sensor
LED Indicator and Light Sensor
LED Feedback (5) RGB LED backlights;
Supports one local color theme for all LEDs;
Supports one alternate color theme for each backlit position
Light Sensor (1) Photosensor with adjustable sensitivity;
Detects the ambient room light level to activate day or night mode and autodimming
the backlight
NOTE: Light sensor performance may be affected by obstructions placed below the keypad.
Wireless
RF Transceiver infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default
channel 15;
IEEE 802.15.4 compliant
Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device;
Subject to site-specific conditions and individual device capabilities
1
Gateway Requires a Crestron Wireless Gateway (sold separately)

Bekijk gratis de handleiding van Crestron HZ2-AUX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCrestron
ModelHZ2-AUX
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11970 MB