Crestron Green Light GLXX-2DIM8 handleiding

Niet gecategoriseerd

Crestron

24 pagina's

PDF beschikbaar

Handleiding

Crestron Green Light Express™ Dimming Panel

Crestron Network to Mini Network Interconnect Diagram

To Mini Network Device

Front

View

Front

View

To Network Device

Black

Blue

White

Red

Shield*

Red

White

Blue

Black

Wire Nuts &

Jumper Wires

Pair A

22 AWG Twisted

Blue = Z

White = Y

Pair B

18 AWG Parallel

Black = Ground

Red = 24 VDC

To Control System

Front

View

Black

Green

CAUTION: Possible Equipment Damage if Miswired

● Do not power up system until all wiring is verified. Care should be taken to ensure Data (Y & Z), and Power

(24 & G) connections are not crossed.

● Ground Shield at the Control System end only.

● Model CNTBLOCK network terminal expander and diagnostic tool for the Cresnet system is recommended for

testing purposes and wiring convenience.

● Jumper wires: Use #18 AWG. Use a wire nut that accommodates all three wires.

NOTE: Crestron recommends the use of C2N-HBLOCK or CNTBLOCK as the preferred method to daisy chain or

expand the Cresnet network. If the blocks are not available, use the method as shown.

Installation Guide – DOC. 6889B Crestron Green Light Express™ Dimming Panel • 23

Bekijk gratis de handleiding van Crestron Green Light GLXX-2DIM8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.