Crestron FT2A-PWR-JP-1-BASIC handleiding
Handleiding
Je bekijkt pagina 10 van 12
10 • FT2A-PWR-JP-1-BASIC Product Manual — Doc. 9401A
6. Orient the power outlet module as shown in the following illustration and slide it down into the
appropriate module slots. Use the guide ribs on the front and rear of the module to help position it
in the assembly.
7. Add any other modules back into the assembly and confirm that all modules are level with their
surroundings.
8. Place the locking bars (removed in step 3) into position so that the screws on either side engage
the screw holes in the assembly.
9. Using a manual torque screwdriver set to its lowest possible setting, hand tighten the locking bar
screws until the locking bars are secured to the FT2 FlipTop assembly.
Bekijk gratis de handleiding van Crestron FT2A-PWR-JP-1-BASIC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | FT2A-PWR-JP-1-BASIC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 706 MB |
