Crestron DM-NVX-SW-C310 handleiding
Handleiding
Je bekijkt pagina 57 van 75
53 • DM-NVX-SW-C310 Product Manual — Doc. 9394B
Settings Tab - Stream, Advanced (Receiver Shown)
Configure the following stream settings:
NOTE: When changes are made in the Advanced section, the changes are saved automatically.
l
Auto Initiation: By default, Auto Initiation is enabled (the toggle switch is set in the On position).
The stream automatically starts when the proper stream configuration settings are assigned.
To disable Auto Initiation, set the toggle switch in the Off position. To start the stream, press the
Start button. To stop the stream, press the Stop button.
l
Custom Ports: By default, Custom Ports is disabled (the toggle switch is set in the Off position).
To enable Custom Ports, set the toggle switch in the On position.
When Custom Ports is enabled, the following port numbers can be changed as required:
o
RTSP Port: Enter or select an RTSP port number. Valid values range from 1 to 65535.
Thedefault RTSP port number is 554.
o
TS Port: For a DM NVX transmitter, enter a TS (transmit stream) UDP port number. The
value must be an even number ranging between 2 and 65534. The default TS port number is
4570.
For a DM NVX receiver, the TS port number is read only and is always set to the TS port
number of the encoded stream.
Bekijk gratis de handleiding van Crestron DM-NVX-SW-C310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | DM-NVX-SW-C310 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6777 MB |
