Crestron DM-NVX-SW-C310 handleiding
Handleiding
Je bekijkt pagina 51 van 75
47 • DM-NVX-SW-C310 Product Manual — Doc. 9394B
By default, the configuration items within each section are displayed. To close or reopen a section, click
the section name.
Discovery Config
To configure device discovery settings:
In the Settings tab, go to the System Setup > Discovery Config section.
Settings Tab - System Setup, Discovery Config
Refer to the configuration guidelines that follow.
NOTE: When changes are made to the Discovery Config section, the changes are automatically
saved.
l
Discovery Agent: By default, Discovery Agent is enabled (the toggle switch is set in the On
position). When enabled, DM NVX transmitters can be discovered for subscription to a receiver in
order to stream video and audio. The transmitters are listed in the Available Streams list in the
Subscriptions section of the Settings tab for a receiver.
To disable Discovery Agent for reasons such as security, set the toggle switch in the Off position.
l
Custom TTL: Multicast TTL provides the ability to limit or extend the hop limit of a DM NVX
stream that traverses routers. In IPv4 multicasting, routers have a TTL threshold assigned to each
interface. Only multicast packets with a TTL greater than the threshold of the interface are
forwarded.
The default multicast TTL setting is 5. To assign a different value:
1. Select the Custom TTL checkbox.
2. In the TTL scrollable text box, enter or select the desired value. Valid values range from 1 to
255.
NOTE: Deselecting the Custom TTL checkbox returns the TTL value to 5, which is the default
setting.
Bekijk gratis de handleiding van Crestron DM-NVX-SW-C310, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | DM-NVX-SW-C310 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6777 MB |
