Crestron DIN-GWDL handleiding
Handleiding
Je bekijkt pagina 28 van 42
Product Manual — Doc. 9096C DIN-GWDL and DIN-GWDL-SPLTR • 28
Local Control
Test and control connected light fixtures without a control processor to verify the system. Use
the MODE rotary dial and SELECT to change the local test modes of the DIN-GWDL.
Mode Dial with Select and Reset Buttons
NOTE:PG3 and PG4 are reserved for future use. N/Ahas no function.
Set All Fixtures to Neutral White
To provide light control prior to control system installation, use PG1 to turn all lights on (at
neutral white) and off. PG1 stops the program, ignores any network commands, and sets all
fixtures to neutral white at 100% intensity.
NOTE:This requires all DMX-C fixtures to be new from the factory or to have been previously
addressed by Crestron Home.
l
Tap SELECT to turn all fixtures on and off.
l
Hold SELECT to dim all fixtures up and down.
Bekijk gratis de handleiding van Crestron DIN-GWDL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | DIN-GWDL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3024 MB |
