Crestron DIN-GWDL handleiding
Handleiding
Je bekijkt pagina 15 van 42
Product Manual — Doc. 9096C DIN-GWDL and DIN-GWDL-SPLTR • 15
DIN-GWDL-SPLTR Specifications
Product specifications for the DIN-GWDL-SPLTR.
Product Specifications
Supported Fixtures
Crestron light fixtures
Crestron compatible third-party light fixtures
Communications
DMX-C Supports discovery, auto-addressing and fixture data;
DMX-C communications with Crestron light fixtures and Crestron compatible
third-party light fixtures
Connections
9-48VDC (1) 3-pin 5.18 mm terminal block;
9 - 48VDC, 4 W Max;
DMX IN (1) 3-pin 5.18 mm terminal block;
Connect to DMX 1 or DMX 2 of DIN-GWDL
Termination:
Terminate the connection to a DIN-GWDL-SPLTR with the 120 Ω termination
resistor included with the DIN-GWDL-SPLTR between the + and - pins on the
terminal block that connects to DMX IN
OUT 1-4 (4) 3-pin 5.18 mm terminal blocks;
Isolated DMX-C outputs;
One universe split between four ports;
Each output supports up to 32 directly connected devices
Wiring:
Use shielded CAT5 wire or better with a shielded connector, do not connect
drain to ground;
24 AWG minimum;
RJ-45 to 3-pin adapters included to make CAT5 STP connections;
Daisy chain all fixtures, do not create loops;
1,000 ft (305 m) maximum per output
Termination:
Terminate all daisy chain runs with the termination resistor included with the
fixtures
Controls and Indicators
RESETbutton (1)Recessed push button for software reset
PWRLED (1) Red LED indicates operating power is supplied
Bekijk gratis de handleiding van Crestron DIN-GWDL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | DIN-GWDL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3024 MB |
