Crestron DIN-DLI handleiding
Handleiding
Je bekijkt pagina 8 van 52
Product Manual — Doc. 9406A DIN-DLI • 8
①
LAN PoE: Connects to the Ethernet network to provide power to the device and communications
between the control system and DIN-DLI. When powered via Cresnet, connect directly to a PCfor link-
local access to the web configuration. Green and yellow LEDs indicate Ethernet port status.
②
DALI: Connects to the DALI network to provide communications between the DALIdevices and DIN-DLI.
③
NET: Connects to the Cresnet wired network to provide power to the device and communications
between the control system and DIN-DLI. Provides pass-thru to additional devices.
④
Override: Connects to a contact closure to provide override control. Provides pass-thru to additional
devices.
⑤
OVR: The LED lights to indicate the override status.
⑥
OVR: Pushbutton enables override mode.
⑦
NET (LED): The LED lights to indicate communications on the NET port.
⑧
RESET: Pushbutton resets internal processor. Holding down for 10 seconds triggers a factory restore.
⑨
PWR: The LED lights to indicate the power status.
⑩
TEST: Pushbutton provides local control of lights and initiates a single DALIdevice replacement.
⑪
DALI (LED): The LED lights to indicate communications on the DALI port. Rapid blinking indicates a
short on the DALI loop.
⑫
Module to Module Connector: Insert module to module jumper to connect Cresnet and Override
between DIN modules that support this connection.
⑬
NFC:Tap with an NFC-enabled device to view the product manual.
Bekijk gratis de handleiding van Crestron DIN-DLI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | DIN-DLI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4191 MB |
