Crestron DIN-DLI handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 31 van 52
Product Manual Doc. 9406A DIN-DLI 31
Enter a custom hostname in the Hostname field. By default, the hostname of the device consists of the
model name followed by its MAC address. For example, DIN-DLI-C4426865E682.
Adapter 1
The Adapter 1 subheading contains settings for DHCP, IP Address, Subnet Mask, and Default Gateway
of the Ethernet adapter.
Set the DHCP toggle to the right to enable DHCP or left to disable DHCP. This determines whether the
IP address of the LAN port is to be assigned by a DHCP (Dynamic Host Configuration Protocol) server.
NOTE:DHCPis required for link-local communication.
l
Enabled: When DHCP is enabled (default setting), the IP address of the LAN port is automatically
assigned by a DHCP server on the local area network (LAN).
l
Disabled: When DHCP is disabled, manually enter information in the following fields:
o
Domain: Enter a fully qualified domain name.
o
Primary Static DNS: Enter a primary DNS IP address.
o
Secondary Static DNS: Enter a secondary DNS IP address.
o
IP Address: Enter a unique IP address for the LAN port.
o
Subnet Mask: Enter the subnet mask that is set on the network connected to the LAN port.
o
Default Gateway: Enter the IP address that is to be used as the LAN network’s gateway.
To save any new network entries, select Save Changes.
Control System
The Control System tab provides settings for configuring a control system connection.

Bekijk gratis de handleiding van Crestron DIN-DLI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkCrestron
ModelDIN-DLI
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4191 MB