Crestron C2N-IRGW-F handleiding
Handleiding
Je bekijkt pagina 17 van 32
Crestron C2N-IRGW-F IR Gateway
“Appendix: Mapping Table” on page 24 contains a table to record
this information. Create as many copies of the table as necessary.
3. Click the Clear button in the “Identify Transmitter” window to
reset the setup.
4. Press a single button on the universal remote and observe the
“Identify Transmitter” window.
5. Record the button title and ID for the action in step 4.
6. Repeat steps 4 and 5 for each button that is to be mapped. Refer to
the sample after this step.
Sample of Completed Mapping Table
7. Repeat this entire procedure (steps 2 through 6) for each source
selection button on the universal remote that requires
programming.
Operations & Installation Guide – DOC. 6574A IR Gateway: C2N-IRGW-F • 13
Bekijk gratis de handleiding van Crestron C2N-IRGW-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | C2N-IRGW-F |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3497 MB |
