Crestron C2N-IRGW-1G handleiding
Handleiding
Je bekijkt pagina 10 van 28
IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F
Setup
Network Wiring
When wiring the network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or damage
to the equipment. Please use the Crestron Power Calculator to help calculate
how much power is needed for the system
(http://www.crestron.com/calculators
).
• For larger networks, Use a Cresnet Hub/Repeater (CNXHUB) to maintain
signal quality.
For more details, refer to “Check Network Wiring” on page 19.
Identity Code
The Net ID of the C2N-IRGW-1G and C2N-IRGW-F has been factory set to 2D.
The Net IDs of multiple C2N-IRGW-1G and C2N-IRGW-F devices in the same
system must be unique. Net IDs are changed from a personal computer (PC) via the
Crestron Toolbox™. When setting the Net ID, consider the following:
• The Net ID of each unit must match an ID code specified in the SIMPL
Windows program.
• Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
Installation
When choosing a location for the C2N-IRGW-1G and C2N-IRGW-F, consider how
reception varies with the angle of incidence of the signal from the transmitter (refer
to illustrations on the next page).
6 • IR Gateway: C2N-IRGW-1G & C2N-IRGW-F Operations & Installation Guide – DOC. 6468A
Bekijk gratis de handleiding van Crestron C2N-IRGW-1G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Crestron |
| Model | C2N-IRGW-1G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3396 MB |
