Handleiding
Je bekijkt pagina 24 van 36
INSTRUCTION
MANUAL
24
Cleaning and Maintenance of the Oven Doors
Drop Down door glass
Remove the profile by pressing the plastic latches on both left and right sides as shown in figure 18 and pulling the profile
towards yourself as shown in figure 19 Then remove the inner-glass as shown in figure 20 If required, middle glass can be
removed in the same way. After cleaning and maintenance are done, remount the glasses and the profile in reverse order.
Make sure the profile is properly seated in its place.
Side opening door Glass
Open the door glass. Remove the glass by pulling upward. The outer glass is fixed to the oven door profile. After removing
the glass, cleaning can be done easily. After determining procedures for cleaning and maintenance, please put the glass by
pushing down. Make sure the glass is well installed.
Rack Positions
It is important to place the wire grill into the oven properly. Do not allow wire
rack to touch rear wall of the oven. Rack positions are shown in the next figure.
You may place a deep tray or a standard tray in the lower and upper wire
racks.
Installing and removing wire racks
To remove wire racks, press the clips shown with arrows in the figure, first remove the lower, and then the upper side from
installation location. To install wire racks; reverse the procedure for removing wire rack.
Bekijk gratis de handleiding van Creda C90RCDFCBL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Creda |
| Model | C90RCDFCBL |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5516 MB |
