Handleiding
Je bekijkt pagina 10 van 44

10
USER
MANUAL
Important Warnings for Installation:
Cooling fan shall take extra steam out and prevent outer surfaces of
appliance from overheating during operation of oven. This is a necessary
condition for better appliance operation and better cooking.
Cooling fan shall continue operation after cooking is finished. Fan shall
automatically stop after cooling is completed.
A clearance must be left behind the enclosure where you’ll place the
appliance for efficient and good operation.
This clearance shouldn’t be ignored as it’s required for ventilation system
of the appliance to operate. This clearance shouldn’t be ignored as it’s
required for ventilation system of the appliance to operate.
Right Place for Installation
The appliance is designed so that it shall fit commercially available counters. A safe clearance shall be left between
the product and kitchen walls or furniture. Refer to the drawings on the installation section. for suitable clearances.
(Dimensions are given in mm)
• Surfaces, synthetic laminates, and adhesives used shall be resistant to heat. (Minimum 100 °C)
• Kitchen cabinets shall be level with the appliance and fixed.
• A rack shall be placed between the oven and the shelf if there is a shelf under the oven.
WARNING: Do not install the appliance beside refrigerators or coolers. Heat radiated by the appliance increases
the energy consumption of cooling devices.
WARNING: Do not use the door and/or handle to carry or move the appliance.
Installation and Assembly of The Oven
Operating space of the appliance shall be determined before starting the installation.
Appliance shall not be installed on areas with high flow of air.
Handle the appliance with two persons at least. Do not drag the appliance to prevent damage to the ground.
Remove all transportation materials inside and outside of the packaging. Remove all materials and documents
inside the product.
Installation Under Counter
Cabinet shall conform with dimensions specified in fig. 2.
A clearance with the dimensions specified in the figure shall be ensured at the rear compartment of the cabinet to
provide the required ventilation.
After installation, the clearance that shall be left between the bottom of the counter and the top of the appliance is
indicated by “A” in fig. 5. This is for ventilation, and it shall not be closed.
Bekijk gratis de handleiding van Creda C80BISMFTCX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Creda |
Model | C80BISMFTCX |
Categorie | Oven |
Taal | Nederlands |
Grootte | 4867 MB |