Handleiding
Je bekijkt pagina 6 van 14
6
INSTRUCTION
MANUAL
Installation of Wall Mounting Bracket
3 drywall (8mm) anchors are nailed into the holes drilled according to installation template (A,B,C). They are fixed
into the wall with 2 brackets as shown in Figure 2.
Installation of Inner Duct Mounting Bracket
2 fixing holes are drilled on the wall with Ø6mm electric drill at a suitable height and place to fix the inner duct
hanger plate onto the wall. 6mm drywall anchors are nailed into those holes and inner duct mounting brackets are
pinned down.
At the last step of chimney hood installation, the inner duct is screwed on the inner duct mounting brackets.
MOUNTING THE CHIMNEY HOOD ON THE
WALL
Lift the chimney hood body and fix the hanger plates onto the wall anchors as shown in Figure 3.
Leveling the Chimney Hood
If the chimney hood is inclined on one side, the chimney hood can be leveled with the adjustment screws as shown
in Figure 4.
Once the balancing is complete, the screws shown in Figure 5 must be fixed tightly.
After this, fix the body with one screw through the hole on the body.
Bekijk gratis de handleiding van Creda C60THX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Creda |
| Model | C60THX |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 1799 MB |
