Handleiding
Je bekijkt pagina 6 van 32
6
USER
MANUAL
15. Make sure the plug is inserted firmly into wall socket to avoid sparks.
16. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.
17. An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from power
supply shall be provided with a switch or an integrated fuse installed on fixed power supply according to
building code.
18. Appliance is equipped with a type ‘’Y’’ cord cable.
19. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances with
over voltage category below III, disconnection device shall be connected to fixed power supply according to
wiring code.
Intended Use
1. This product has been designed for domestic use. Commercial use is not permitted.
2. This appliance may only be used for cooking purposes. It shall not be used for other purposes like heating a
room.
3. This appliance shall not be used to heat plates under the grill, drying clothes or towels by hanging them on the
handle or for heating purposes.
4. The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
5. Oven part of the unit may be used for thawing, roasting, frying and grilling food.
6. Operational life of the product you have purchased is 10 years. This is the period for which the spare parts
required for the operation of this product as defined is provided by the manufacturer.
Electrical Connection
This oven must be installed and connected to its place correctly according to manufacturer instructions and by an
authorized service.
Appliance must be installed in an oven enclosure providing high ventilation.
Electrical connections of the appliance must be made only via sockets having earth system furnished in compliance
with rules. Contact an authorized electrician if there is no socket complying with the earthed system at where
appliance will be placed. Manufacturing company is by no means responsible for damage resulting from connection
of non-earthed sockets to appliance.
Plug of your oven must be earthed; ensure that socket for the plug is earthed. Plug must be located in a place that
can be accessed after installation.
Your oven has been manufactured as 220-240 V 50/60 Hz. AC power supply compliant and requires a 16 Amp
fuse. If your power network is different that these indicated values, refer to an electrician or your authorized service.
When you need to replace the electrical fuse, please ensure that electrical connection is made as follows:
• Phase (to live terminal) brown cable
• Blue cable to neutral terminal
• Yellow-green cable to earth terminal
Oven disconnecting switches must be in an accessible place for final user while oven is in its place.
Power supply cable (plug in cable) mustn’t touch hot parts of the appliance.
If supply cord (plug in cable) is damaged, this cord must be replaced by the importer or its service agent or an
equally competent person to prevent a hazardous situation.
Bekijk gratis de handleiding van Creda C60BIMFX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Creda |
| Model | C60BIMFX |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3840 MB |
