Handleiding
Je bekijkt pagina 10 van 32
10
INSTRUCTION
MANUAL
INSTALLATION OF APPLIANCE
Ensure that electrical installation is suitable for operationalising the appliance. If not, call an electrician and plumber
to make necessary arrangements. Manufacturing firm can't be hold responsible for damages to arise due to
operations by unauthorized people and product warranty becomes void.
WARNING: It is customer's responsibility to prepare the location the product shall be placed on and also have power
utility prepared.
WARNING: The rules about electrical local standards must be adhered to during product installation.
WARNING: Check for any damage on the product before installing it. Do not have product installed if it's damaged.
Damaged products pose danger for your safety.
Important Warnings For Installation:
Cooling fan shall take extra steam out and prevent outer surfaces of appliance from
overheating during operation of oven. This is a necessary condition for better appliance
operation and better cooking. Cooling fan shall continue operation after cooking is
finished. Fan shall automatically stop after cooling is completed.
A clearance must be left behind the enclosure where you’ll place the appliance for efficient
and good operation.
This clearance shouldn’t be ignored as it’s required for ventilation system of the appliance
to operate.
Right Place For Installation
Product has been designed to be mounted to worktops procured from market. A safe distance must be left between
the product and kitchen walls or furniture. See the drawing provided on the next page for proper distances. (Values
in mm).
• Used surfaces, synthetic laminates and adhesives must be heat resistant. (Minimum 100 °C)
• Kitchen cupboards must be level with product and secured.
• If there is a drawer below the oven, a rack must be placed between oven and drawer.
WARNING: Do not install the product next to refrigerators or coolers. The heat emitted by the product increases
the energy consumption of cooling devices.
WARNING: Do not use door and/or handle to carry or move the product.
60 Cm BUILT-IN OVEN INSTALLATION AND MOUNTING
Place of use for product must be located before starting installation.
Product mustn't be installed in places which are under the effect of strong air flow.
Carry the product with minimum two people. Do not drag the product so that floor isn't damaged.
Remove all transportation materials inside and outside the product. Remove all materials and documents in the
product.
Bekijk gratis de handleiding van Creda C60BIFX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Creda |
| Model | C60BIFX |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 3359 MB |
