Create PRO 9 handleiding
Handleiding
Je bekijkt pagina 9 van 74
9
ENGLISH
INSTALLATION AND REMOVAL OF ACCESSORIES
• After using the appliance, you should set the temperature to OFF, then pull out the plug;
otherwise, it will cause electrical leakage and injury.
• Regularly clean the dust and dirt, or it will cause re accidents.
• Washing it with water to wet the body may cause electric leakage, damage, etc.
• Do not let the product fall or hit, as it will lead to electric leakage, short circuit, bodily
harm, gas and water leakage.
• Do not shake the product vigorously or invert the machine to use steam, which will lead to
the possibility of water leakage and burns.
• Please do not press the steam button continuously, as it will cause hot water leakage and
burn your body.
• When the body still has the residual heat, please do not remove the outlet head or remove
the brush accessories, which will burn and injure you.
• When the body still has the residual heat, please do not wrap the power cord on the prod-
uct, which will cause product re and short circuit.
• Do not use polishing powder or corrosive cleaning liquid to polish the metal panel of the
product, as it will damage the product.
• Do not use thinner, naphtha, spray cleaners, alkali, etc., as they will cause the body to
deform and break down.
• During use, please make sure the types of clothes and cleaning standard are correct,
otherwise it may damage the clothes.
• While using the steam brush, please place it properly and make sure it is stable; other-
wise it may cause a re.
• When adding and pouring water, you must unplug the power cord, or it will cause electri-
cal leakage.
• When the product is no longer in use, you must pour out the water and clean it, or the
water will give off a bad smell and even damage the product.
• Before cleaning and storing the product, make sure it is cool or it cannot cause burns.
• Conrm that there is no steam from the steam outlet hole before installing parts.
• Please conrm that the power cord is not plugged in before installation.
• Do not install or remove parts while connected to light.
ATTENTION:
• During use, please make sure that each part is xed on the main body. During use, do not
replace parts to avoid burns.
• When you need to change any accessories, please turn off and unplug the power cord, cool
it down for ve minutes, and then change the accessory.
Bekijk gratis de handleiding van Create PRO 9, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Create |
| Model | PRO 9 |
| Categorie | Stoomreiniger |
| Taal | Nederlands |
| Grootte | 6767 MB |