Create Juicer Slow Mini handleiding
Handleiding
Je bekijkt pagina 9 van 56
9
ENGLISH
INSTRUCTIONS FOR USE
Make sure you clean your slow extraction blender well before using it.
1. Place the installed machine rmly on a level table.
2. Prepare the ingredients. Cut them into suitable pieces according to the different ingre-
dients.
3. Turn the switch to the “ON” position and the device will start to work, and then put the
ingredients into the feeding cup. When the ingredients are too large to press gently, use
the pusher plunger to push the ingredients in properly.
4. If the ingredients are blocked in the press cup, turn the switch to the "REV" position for
3-5 seconds, then turn the switch to the stop position, stop working for 1-2 seconds, and
then turn the switch to “ON” for normal work.
5. After use, remove the components from the juice and clean them in time. Please note that
you need to reinstall it on the lter after cleaning the lter silicone ring so that no parts
are missing in the next use.
3. Mount the pressing propeller on the pressing cup.
4. Mount the lter in the press cup. Align the point of the lter with the point of the press cup
(the largest buckle with the largest slot). Insert the lter into the pressing cup.
5. Mount the feeding cup on the machine and rotate it to the correct position. Align the feed
cup with the press cup. Turn it clockwise until the buckle presses on the microswitch.
After hearing a click, it indicates that the installation is complete.
Bekijk gratis de handleiding van Create Juicer Slow Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Create |
| Model | Juicer Slow Mini |
| Categorie | Sapcentrifuge |
| Taal | Nederlands |
| Grootte | 5670 MB |