Creality K2 handleiding

Handleiding

123456789101112131415161718192021222324252627282930/ 30

Afdrukken

Je bekijkt pagina 3 van 30

1. Do not use the printer in any way other than described herein in order to avoid personal inju or propey damage;

2. Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a well-ventilated, cool and

dustless environment;

3. Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print quality;

4. Please use recommended laments to avoid clogging of the extrusion head and causing damage to the machine;

5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet, which accompa-

nies the printer;

6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal inju;

7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable pas that could cause crushing and

cutting injuries to bodily pas;

8. Use the provided tools to clean the lament from the extruder in time taking advantage of the residual temperature after printing. Do

not touch the extruder directly when cleaning, otherwise it may cause burns;

9. Clean the printer frequently. Clean the printer body with a d cloth regularly after powering o the printer, wipe away dust, bonded

print lament and foreign objects on the guide rails;

10. Children must be accompanied by an adult at all times when using or near the printer；

11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is located

(used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for

any illegal purposes; Creality will not be responsible for any violators' legal liability under any circumstance;

12. Tip: Do not plug in or unplug wires on a charged basis.

NOTES

Hot pas!

Burned ngers when handling the pas

Wait one-half hour after switching o before handling pas

123456789101112131415161718192021222324252627282930/ 30

Bekijk gratis de handleiding van Creality K2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Creality (Niet gecategoriseerd)

Handleiding bekijken

Creality K1C

Niet gecategoriseerd - handleiding

Handleiding bekijken

Creality Falcon2 Pro

Niet gecategoriseerd - handleiding

Handleiding bekijken

Creality HALOT R6

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd