Creality HALOT R6 handleiding
Handleiding
Je bekijkt pagina 9 van 24
Note: The platform has been leveled at the facto. If it needs leveling due to transpoation or other reasons, please follow the steps below to
adjust the printing platform.
1. Raise the platform, loosen rubber screws on the left
and right sides of the resin vat, and take out the resin vat.
2. Loose the four screws on the
connecting plate on molding platform
plate, attach calibration card on the
printing screen, press Settings →Print
Settings→ Z axis movement →Leveling,
Check whether the platform ts evenly
with the paper by referring to the steps
on Page 6.
3.After conrming that the calibration
card t evenly, lock the four screws of
the platform.
T
5. Leveling Guide
05
Bekijk gratis de handleiding van Creality HALOT R6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Creality |
| Model | HALOT R6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2968 MB |
