Craftsman CMCR001 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536/ 36

Afdrukken

Je bekijkt pagina 8 van 36

English

6

ASSEMBLY AND ADJUSTMENTS



WARNING: To reduce the risk of serious personal

injury, turn unit off and disconnect it from

power source and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start-up can causeinjury.

Inserting and Removing the Battery Pack

from the Bluetooth® Speaker (Fig. B)

nOTE: Make sure your battery pack

15

is fullycharged.

To Install the Battery Pack into the Unit

1. Align the battery pack

15

with the rails inside the

speaker's battery port

11

(Fig.B).

2. Slide it in until the battery pack is firmly seated and

ensure that you hear the lock snap intoplace. Be sure

that it does not disengage.

To Remove the Battery Pack from

the Unit

1. Press the battery release button

12

and firmly pull the

battery pack out of the battery port.

2. Insert battery pack into the charger as described in the

charger section of thismanual.

SAVE THESE INSTRUCTIONS FOR

FUTURE USE

COMPONENTS (FIG. A)

Be sure to only use the power supply supplied with

thespeaker.

Intended Use

This speaker is designed for household use.

This Bluetooth® speaker is designed to play/stream audio via

a wireless Bluetooth® connection or wired connection to a

mobile phone or other audio device.

DO nOT use under wet conditions or in presence of

flammable liquids orgases.

DO nOT let children come into contact with the tool.

Supervision is required when inexperienced operators use

thistool.

OPERATION



WARNING: To reduce the risk of serious personal

injury, turn unit off and disconnect it from

power source and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start-up can causeinjury.

Instructions for Use (Fig. C)



WARNING: Always observe the safety instructions

and applicableregulations.

Power Button

1. To turn on the speaker, press the power button

1

.

2. To turn the speaker off, press the power button

1

.

Volume Adjustment

When the speaker is paired to a Bluetooth® device the

increase and decrease volume buttons

2

can be used to

increase or decrease volume on the audiodevice.

Track Change

When the speaker is paired to a Bluetooth® device the

right and left arrow buttons

3

can be used to skip or go to

previous tracks on the audiodevice.

Fig.C

1

2

3

Components

Tool Use

speaker household

optimal depth leaving approximately 7/32" (5.5 mm) of the

screw exposed. Align the slots on the back of the charger

with the exposed screws and fully engage them in theslots.

Versatrack

CRAFTSMAN chargers can be mounted to the wall using

CRAFTSMAN Versatrack Trackwall. Hooks and accessories

are sold separately. Please refer to the Versatrack Trackwall

accessory sheet for furtherinformation.

Fig.B

15

11

12

123456789101112131415161718192021222324252627282930313233343536/ 36

Bekijk gratis de handleiding van Craftsman CMCR001, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Speaker