Handleiding
Je bekijkt pagina 21 van 52
21
2. Choose the valve location.
• Choose an easily accessible
location on the cold water pipe for
the shutoff valve. It is best to
connect into the side of a vertical
water pipe. When it is necessary to
connect into a horizontal water
pipe, make the connection to the
top or side, rather than at the
bottom, to avoid drawing off any
sediment from the water pipe.
3. Drill the hole for the valve.
• Drill a 1/4" hole in the water pipe
(even if using a self-piercing valve)
using a sharp bit. Be cautious not
to allow water to drain into the
drill. Remove any burrs resulting
from drilling the hole in the pipe.
Failure to drill a 1/4" hole may
result in reduced ice production or
smaller cubes.
4. Fasten the shutoff valve.
• Fasten the shutoff valve to the
cold water pipe with the pipe
clamp.
NOTE:
• Commonwealth of
Massachusetts Plumbing Codes
248CMR shall be adhered to.
Saddle valves are illegal and use
is not permitted in
Massachusetts. Consult with your
licensed plumber.
Pipe clamp
Shutoff valve
Vertical cold
water pipe
Vertical cold
water pipe
Bekijk gratis de handleiding van Cosmo COS-RFFV183RS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cosmo |
| Model | COS-RFFV183RS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3948 MB |
