Handleiding
Je bekijkt pagina 18 van 44
18
IMPORTANT:
USING THE GAS SURFACE BURNERS
The appearance of the knobs may vary from what are shown below.
Lighting a Surface Burner
NOTE:
1. Select a burner and find its control knob.
2. Push the control knob in and turn it to the IGNITE position. The electric
spark ignition system will make a clicking noise.
• The use of a gas-cooking appliance results in the production of heat and
moisture in the room in which it is installed. Ensure that the kitchen is well
ventilated: keep natural ventilation holes open or install a mechanical
ventilation device (mechanical extractor hood).
• Prolonged intensive use of the appliance may call for additional
ventilation, for example opening of a window, or more effective
ventilation, for example increasing the level of mechanical ventilation
where present.
• When one burner on the left or the right side is turned to IGNITE,
the other 3 burners on the same side will spark. Sparking will
continue as long as the knob remains at IGNITE.
OFF position IGNITE position HI position LO position
3. Once gas is ignited, turn the control knob to adjust the flame size.
4. To turn off a burner, turn the control knob to the OFF position.
OFF
HI
LO
HI
Bekijk gratis de handleiding van Cosmo COS-DFRP488K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cosmo |
| Model | COS-DFRP488K |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3204 MB |