Corsair RM750 handleiding
Handleiding
Je bekijkt pagina 5 van 68
Description Quantity
Connectors Total length 650W 750W 850W
ATX CABLE 24 PIN
610mm
(± 10mm)
1 1 1
EPS / ATX12V 8 PIN (4+4)
650mm
(± 10mm)
2 3 3
PCIe CABLE 8 PIN (6+2)
750mm
(± 10mm)
2 2 2
SATA CABLE (3 SATA - RIGHT ANGLE)
750mm
(± 10mm)
1 2 2
SATA CABLE (4 SATA - RIGHT ANGLE)
850mm
(± 10mm)
1 2 2
PATA CABLE (4-PIN)
750mm
(± 10mm)
1 1 1
520mm 115mm 115mm
550mm 100mm 100mm 100mm
505mm 115mm 115mm 115mm
650mm
610mm
600mm
150mm
450mm 100mm 100mm 100mm
INSTALLING YOUR NEW RM SERIES POWER SUPPLYCORSAIR RM SERIES CABLE INFORMATION
Step 1: Removing Your existing PSU
WARNING! To ensure proper function, only use the DC cables included with your new PSU, unless your
old cables are genuine CORSAIR cables of the same type. Please conrm your existing cables’ type before
using them!
If you are building a new system, skip to Step 2:
1. Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply.
2. Disconnect all the power cables from your video card, motherboard and all other peripherals.
3. Follow the directions in your chassis manual and uninstall your existing PSU.
4. Proceed to Step 2.
Step 2: Installing the New Power Supply
1. Make sure the power supply’s AC power cable is not connected.
2. Follow the directions in your chassis manual and install the power supply with the screws provided.
3. Connect the 24-pin (ATX) cable to the motherboard. Connect the 8-pin +12V (EPS12V) cable to
the motherboard.
a. If your motherboard has an eight-pin +12V socket, connect the eight-pin cable directly
to your motherboard.
b. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug this
four-pin cable directly to your motherboard.
c. Some motherboards will require a mix of 8+4 pins, use as many EPS12V cables as necessary and do not
mistake them for PCIe cables.
4. Connect the peripheral cables, PCI-Express cables, and SATA cables.
a. Connect the SATA cables to your SATA SSD or hard drive’s power sockets.
b. Connect the PCI-Express cables to the power sockets of your PCI-Express video cards if required.
c. Connect the peripheral cables to any peripherals requiring a 4-pin connector.
d. Make sure all the cables are tightly connected. Be sure to save any unused modular cables for future
component additions.
5. Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position
(marked with “I”).
ENGLISH ENGLISH
5 6
Bekijk gratis de handleiding van Corsair RM750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Corsair |
| Model | RM750 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10895 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 1700 g |
| Breedte | 150 mm |
| Diepte | 86 mm |
| Hoogte | 160 mm |
