Cooking Performance Group 351COHD3A handleiding

Oven

Cooking Performance Group

14 pagina's

PDF beschikbaar

Handleiding

www.cookingperformancegroup.com

User Manual

Installation

• These units are designed for commercial use and not for household use.

• Installation must conform to all applicable codes. Improper installation will void the

manufacturer’s warranty.

• Do not obstruct or reduce the air ow rate of the natural ventilation openings on the

oven or the vent located at the rear of the oven.

• Discontinue use if power cord or electrical wires are frayed or worn.

• This product conforms to UL-197 standards and is required to be installed under a

ventilation hood in accordance with all applicable codes.

Combustiable Clearance Requirements: 20" Sides, 28" Back

Non-Combustiable Clearance Requirements: 2" Sides, 2" Back

Installation Instructions

The place of installation must be indoors, well ventilated, and the ambient temperature must be at least

40 degrees Fahrenheit. The unit is required to have at least 2" of clearance on the sides and back from

non-combustible surfaces, or at least 20" and 28" of clearance on the sides and back, respectfully, from

combustible surfaces. Ensure that all four legs are installed correctly before the operation of this oven.

The unit is required to be installed on a non-combustible surface with 4" legs, or a combustible oor with

a stand. For full-size models, level unit by adjusting the (4) feet which have an adjustment of 1¾" for

accurate leveling.

This product conforms to UL-197 standards and requires it to be

under an exhaust hood. A vertical distance of not less than 48"

shall be provided between the top of the appliance and lters

or any other combustible material. Exhaust installation must

conform to applicable local codes.

Do not obstruct or reduce the air ow rate of the natural

ventilation openings on the oven or the vent located at the rear

of the oven. To ensure proper ventilation and clearance, the

provided spacer is required to be installed.

The spacer must be installed by screwing (2) self-threading

screws on the back of the unit immediately below the cooling

fan.

NOTE: For Oven Stacking Instructions, please see page 14.

WARNING: DO NOT OBSTRUCT THE VENT OR COOLING FAN LOCATED AT THE REAR OF

THE OVEN.

Bekijk gratis de handleiding van Cooking Performance Group 351COHD3A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.