Continental Edison CEVCSP330G handleiding
Handleiding
Je bekijkt pagina 30 van 32
Consumables, Fault and Handling
The plug is not properly connected and
loose, resul�ng in poor contact.
The internal line or power cord is broken.
The machine set overheats and the
protec�ve device operates
The power switch is not turned on.
The sewage bucket is full, causing
the floa�ng ball to work.
The hose is abnormal.
The sewage bucket is not installed in place.
The inlet air sponge is blocked
Turn off the power and plug it again.
Call the repair telephone.
Refer to the instruc�ons for protec�ve
device.
Remove the water sucker and rinse the
nozzle with clean water.
Call the repair telephone.
Turn on the power switch.
Clean up the sewage and use it again.
Check the hose for cracks, breaks and
clogs.
Install the sewage bucket properly.
Clean or replace the sponge.
The consumables can be removed and replaced when damaged or lost.
Be sure to install and use
In the event of excep�ons in use, read this manual carefully and confirm
the following points before repair.
The nozzle is blocked.
The handle or pump is damaged.
Seal ring for
upper cover
Inlet air sponge Filtering sponge Screw cap
Status Fault cause analysis
The machine
does not work
is turned on
When the watering
there is no water
There is no dust
weak
Handling
30
Bekijk gratis de handleiding van Continental Edison CEVCSP330G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Continental Edison |
| Model | CEVCSP330G |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3976 MB |