Constructa CC4W91963 handleiding
Handleiding
Je bekijkt pagina 59 van 156
Troubleshooting en
59
14 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ If the appliance is defective, call Customer Service.
→"Customer Service", Page60
WARNING‒Risk of electric shock!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ Only use genuine spare parts when repairing the
appliance.
▶ If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
14.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
Malfunction
1.
Switch off the fuse in the fuse box.
2.
Switch the fuse back on after approx. 10seconds.
a If the fault was a one-off, the message disappears.
3.
If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→"Customer Service", Page60
Appliance is not heat-
ing, colon is flashing
in the display.
Demo mode is activated.
1.
Briefly disconnect the appliance from the power supply by switching the circuit breaker in
the fuse box off and then on again.
2.
Deactivate demo mode within 5minutes by changing the basic setting to .
Microwave operation
is stopped.
Malfunction
1.
Switch off the fuse in the fuse box.
2.
Switch the fuse back on after approx. 10seconds.
a If the fault was a one-off, the message disappears.
3.
If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→"Customer Service", Page60
Food takes longer
than usual to heat up.
The microwave power setting was too low.
▶
Select a higher microwave power setting.
You have placed a larger amount of food than normal in the appliance.
▶
Set a longer cooking time.
Double the amount needs double the cooking time.
The food was colder than usual.
▶
Stir or turn the food during cooking.
Microwave not work-
ing.
The door was not fully closed.
▶
Check whether food residue or debris is trapped in the door.
has not been pressed.
▶
Press .
12:00 flashes in the
display and the
symbol lights up.
There has been a power cut.
▶
Reset the time.
→"Setting the time", Page49
Bekijk gratis de handleiding van Constructa CC4W91963, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Constructa |
| Model | CC4W91963 |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 17046 MB |