Constructa CC4W91963 handleiding
Handleiding
Je bekijkt pagina 52 van 156
en Microwave
52
WARNING‒Risk of scalding!
The accessible parts of the appliance become hot dur-
ing operation.
▶ Never touch these hot parts.
▶ Keep children at a safe distance.
1.
Place the empty cookware in the cooking compart-
ment.
2.
Set the appliance to run for 30 seconds to 1 minute
at maximum power.
3.
Press to start.
4.
Check the cookware several times:
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, the stop the cookware test. The cookware
is not microwave-safe.
8.4 Configuring the microwave settings
Different power levels and settings are available for dif-
ferent types of food and recipes.
ATTENTION!
Operating the appliance without food in the cooking
compartment may lead to overloading.
▶ Do not switch on the microwave unless there is food
inside. The only exception to this rule is when per-
forming a short cookware test.
1.
Read the safety instructions →Page42 and the sec-
tion on how to prevent material damage →Page44.
2.
Read the information on microwave-safe cookware
and accessories. →Page51
3.
Press .
a The appliance is ready to use.
a The display shows the maximum microwave power
setting of 900 watts as the default value.
4.
Set the required microwave power setting using the
settings area.
a The display shows the microwave power setting and
a default cooking time.
5.
Press .
6.
Set the required cooking time using the settings
area.
7.
Press to start.
You can change the cooking time at any time during
operation in the settings area.
a The cooking time starts to count down and the mi-
crowave starts.
a lights up.
a Once the cooking time has elapsed, the microwave
stops and a signal sounds.
8.
When the dish is ready, open the appliance door or
press any field.
8.5 Intervals for the time settings
The interval for setting a cooking time in microwave op-
eration changes with the length of the cooking time.
Cooking time Interval
0–1minutes 5seconds
1-3minutes 10seconds
3–15minutes 30seconds
15minutes – 1hour 1minute
1hour–
1hour30minutes
5minutes
8.6 Changing the microwave power
1.
Press .
2.
Set the required microwave power setting using the
settings area.
If the microwave function is only added after start-
ing, the appliance pauses. Press to start.
8.7 Pausing operation
You can pause operation at any time.
1.
Press or open the appliance door.
a Operation is paused.
a flashes.
2.
To continue operation, close the appliance door and
press .
a Operation continues.
a lights up.
8.8 Stopping operation
You can stop operation at any time.
▶
Press .
The fan may continue to run after operation has
been paused or stopped.
a The appliance stops any ongoing functions.
8.9 MicroCombi
To reduce the cooking time, you can use certain of the
types of heating in combination with microwave mode.
MicroCombi mode can be used with the following
types of heating:
¡ Hot air
¡ Hot air grilling
¡ Grill
Exceptions:
¡ Microwave power setting 900 W
¡ Hot air 40°C
¡ Warming plates
Configuring MicroCombi mode
Switch on microwave mode in addition to a type of
heating.
1.
Press .
a The appliance is ready to use.
a The display shows the maximum microwave power
setting of 900 watts as the default value.
Bekijk gratis de handleiding van Constructa CC4W91963, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Constructa |
| Model | CC4W91963 |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 17046 MB |