Compex Tens handleiding
Handleiding
Je bekijkt pagina 17 van 244
17
1st Step – Charge control unit before rst use
CONTROL UNIT USB CABLE
The control unit comes with a built-in rechargeable battery, and can be
used as received. If the battery icon on the turned-on control unit keeps
ashing, it means the battery is running out. Charge the control unit with
the enclosed USB cable. The battery icon ashes during charging, and
becomes solid when the control unit is charged fully.
2nd Step - Dampen wrap pads for best results
Lightly dampen conductive silver pads with clean water
3rd Step - Apply to the body part
Apply wrap to the body part using velcro strap/s to secure in place
4th Step - Connect control unit to the brace
MAGNETS
Apply control unit to brace using magnets to secure connectors. Connect
gold magnets to gold connectors, and silver magnets to silver connectors.
The screen should be right reading from the user looking down.
5th Step - Turn control unit on
ON/OFF BUTTON
Hold On/O button for 2 seconds to turn on device. Front display panel will
light-up, indicating the device is on. Press the On/O button once to lock/
unlock the screen buttons. When buttons are locked, no adjustments can
be made. Hold On/O button for 2 seconds to turn o the device.
Bekijk gratis de handleiding van Compex Tens, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Compex |
| Model | Tens |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13756 MB |