Handleiding
Je bekijkt pagina 24 van 170

Drainage guide
During dehumidifying modes, remove the drain plug from the back of the unit, install the drain connector
(5/8" universal female mender) with 3/4" hose(locally purchased). For the models without drain
connector, just attach the drain hose to the hole. Place the open end of the hose directly over the drain
area in your basement floor.
When the water level of the bottom tray reaches a predetermined level, the unit beeps 8 times, the digital
display area shows "P1" . At this time the air conditioning/dehumidification process will immediately stop.
However, the fan motor will continue to operate(this is normal).
Carefully move the unit to a drain location, remove the bottom drain plug and let the water drain away.
Reinstall the bottom drain plug and restart the machine until the "P1" symbol disappears. If the error
repeats, call for service.
NOTE:
Make sure the hose is secure so there are no leaks. Direct the hose toward
the drain,making sure that there are no kinks that will stop the warter
flowing. Place the end of the hose into the drain andmake sure the end
of the hose is down to let the water flow smoothly. When the continuous
drain hose is not used, ensure that the drain plug are installed firmly to
prevent leakage.
NOTE:
Be sure to reinstall the bottom drain plug firmly to revent leakage before
using the unit.
Dehumidifying Mode Drainage Guide
Dehumidifying Mode Drainage Guide
Step 1:
Remove the
drain plug
Step 2:
Install the continuous
drain hose
Remove the
bottom
drain plug
23
Bekijk gratis de handleiding van Comfee MPPA-09CRN7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Comfee |
Model | MPPA-09CRN7 |
Categorie | Airco |
Taal | Nederlands |
Grootte | 16099 MB |