ColorKey Creator BX7 Wash handleiding
Handleiding
Je bekijkt pagina 20 van 27
20
Creator BX7 WASH
Stand Alone Settings
To use your Creator BX7 WASH without a DMX Controller, use one of the various
standalone modes below.
*Note: Standalone operation (ex: Auto or Sound Active) may cause the fixture to transmit DMX
data. To prevent interference with other fixtures, do not connect it to a DMX network unless
part of a proper Master/Slave configuration. *
Automatic Programs
To run the Creator BX7 WASH in Automatic Mode, follow the instructions below:
1. Press (Menu)
2. Press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Press (OK) to select “Run Mode”
5. Use (Up or Down) to scroll to “Auto”
6. Press (OK) to make selection
Sound Active Mode
To run the Creator BX7 WASH in sound-active mode, do the following:
1. Press (Menu)
2. Press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Press (OK) to select “Run Mode”
5. Use (Up or Down) to scroll to “Sound”
6. Press (OK) to make selection
Sound Sensitivity
To set the Sound Active sensitivity on the Creator BX7 WASH, follow the instructions
below:
1. Press (Menu)
2. Press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Use (Down) repeatedly to reach “Sensitivity”
5. Press (OK) to make selection
6. Use (Up or Down) to select Sound Sensitivity (0 to 99)
7. Press (OK) to make selection
8. Press (Menu) to return to menu
Bekijk gratis de handleiding van ColorKey Creator BX7 Wash, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ColorKey |
| Model | Creator BX7 Wash |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6126 MB |
