ColorKey Creator BSW 1200 handleiding
Handleiding
Je bekijkt pagina 19 van 26

19
Creator BSW 1200
Stand Alone Settings
To use your Creator BSW 1200 without a DMX Controller, use one of the various
standalone modes below.
*Note: Standalone operation (ex: Auto or Sound Active) may cause the fixture to transmit DMX
data. To prevent interference with other fixtures, do not connect it to a DMX network unless
part of a proper Master/Slave configuration. *
Automatic Programs
To run the Creator BSW 1200 in Automatic Mode, follow the instructions below:
1. Press (Menu)
2. Press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Press (OK) to select “Run Mode”
5. Use (Up or Down) to scroll to “Auto 1” or “Auto 2”
6. Press (OK) to make selection
Sound Active Mode
To run the Creator BSW 1200 in sound-active mode, do the following:
1. Press (Menu)
2. Double press (Down) to highlight “Set”
3. Press (OK) to select “Set”
4. Press (OK) to select “Run Mode”
5. Use (Up or Down) to scroll to “Sound”
6. Press (OK) to make selection
Sound Sensitivity
To set the Sound Active sensitivity on the Creator BSW 1200, follow the instructions
below:
1. Press (Menu)
2. Tripple press (Down) to highlight “Calib”
3. Press (OK) to select “Calib”
4. Enter the password: 6688 or 1324
5. Use (Down) repeatedly to select “Mic”
6. Press (OK) to make selection
7. Use (Up or Down) to set Mic Sensitivity (000 to 255)
8. Press (OK) to save
Bekijk gratis de handleiding van ColorKey Creator BSW 1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | ColorKey |
Model | Creator BSW 1200 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 5764 MB |