Collomix TMX 1500 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980/ 80

Afdrukken

Je bekijkt pagina 21 van 80

Collomix GmbH TMX 1000

85080 Gaimersheim TMX 1500

21

Operaon

X Close the protecve grang and make sure that it is locked.

X Switch on the mixer. Press the green start buon.

X If installed, switch on the vacuum cleaner.

X Place the material bag with its broad side on the grid cover with the bag ripper and move

it back and forth slightly unl the sack is fully open. Gradually ll the content of the bag

into the drum.

X Fill the necessary amount of water into the mixing drum.

X Pay aenon during the mixing process to determine whether the material is mixed to a

sucient extent.

X To empty the mixing drum, open the boom segment slide using the lever.

If the material comes to a standsll in the discharge chute, emptying can be accelerated by

vibrang movements with the lever aached on the right.

X To empty the mixing drum, open the boom segment slide using the lever.

X Empty the mixed material into a bucket or wheelbarrow.

X Press the red OFF buon “0” to switch o the machine. The machine comes to a stop.

The machine is ed with a protecon switch. It switches the machine o in the event of over-

loading/overheang. Let the motor cool down and restart the machine.

The machine is fitted with an undervoltage trigger. If it triggers, the machine is stopped. This may

occur due to the following reasons:

• Voltage drop in the mains supply

• Supply cable too long

• Power supply disconnected

Restart after the malfunction is corrected.

IMPORTANT:

Observe the informaon in the technical data sheets of the material manufacturers.

The necessary mixing me depends on the quanty and viscosity of the material.

WARNING

Risk of injuries due to rotang mixing tool.

Do not reach into the mixing drum or handle tools in the mixing drum during mixing.

ATTENTION

Only use the mixer for the tasks listed in chapter “Intended use”. Observe the safety

informaon respecvely.

Removing the mixing tool

Unlock and open the cover with the protecve grang.

The mixing tool rests on the hexagonal pin of the drive sha without addional aachment.

You can easily li the mixing tool o of the sha. It may happen that you need to move the tool

back and forth a lile if it has strued apart.

The individual mixing shovels can be replaced. To do this, loosen the screw connecons on the

arms of the mixing tool.

EN

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980/ 80

Bekijk gratis de handleiding van Collomix TMX 1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd