Collomix TMX 1500 handleiding
Handleiding
Je bekijkt pagina 17 van 80
Collomix GmbH TMX 1000
85080 Gaimersheim TMX 1500
17
X Do not connect the device to standard electrical sockets. Always connect the devices via a residual
current device (RCD) with a response current of 30 mA or less.
X If a cable reel is used, the cable must be fully unwound. There is a risk of a cable fire due to heating.
A loss of power may occur as well, leading to the undervoltage protection being triggered.
X Repairs on electrical components may only be carried out by a recognised electrician, complying
with the local regulations.
X Electrical operating equipment must be subjected to a regular inspection by an electrician (accor-
ding to German Social Accident Insurance DGUV 3).
X Keep the device away from rain and moisture. Water penetration into an electrically operated
machine increases the risk of an electric shock.
X Always pull the mains plug during non-operation, maintenance or when replacing the mixing tool.
X Do not disconnect the plug from the socket by pulling on the cord. Protect the cable against heat,
oil, bending and sharp edges.
X Check the cable for damage or defects prior to use.
X Wait, until the device and/or tool comes to a complete standstill. Rotating tools can get stuck and
cause injuries or damage.
X Only remove material samples with the device at standstill.
X Acute risk of accidents and injuries if the safety functions are disabled on purpose. In this case, the
warranty shall become void.
X Check the machine regularly for flawless function and damage. Do not put the machine in opera-
tion with damaged or defective safety components.
X Do not clean the machine using a high-pressure cleaner or hose – risk of electric shock!
X Do not expose the machine to any rain, not even during transportation.
X Observe the processing and safety information of the manufacturer for the material to be mixed.
X The machine must be firmly lashed in at least three directions for vehicle transport.
X Only operate the machine with the TMX mixing tool that is suitable for the machine.
X Only use original spare parts. The use of third-party spare parts may lead to accidents of the user.
The manufacturer shall not be liable for any resulting damage.
RCD 30mA
EN
Bekijk gratis de handleiding van Collomix TMX 1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Collomix |
| Model | TMX 1500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15523 MB |
Caratteristiche Prodotto
| Gewicht | 138400 g |
| Breedte | 840 mm |
| Diepte | 755 mm |
| Hoogte | 1260 mm |
| Maximaal ingangsvermogen | 2800 W |