CME U4MIDI WC handleiding
Handleiding
Je bekijkt pagina 8 van 35
8 / 35
operations are based on the WIDI BLE firmware version v0.2.2.1 or later
- When U4MIDI WC is not powered on, press and hold the button and
then power on U4MIDI WC until the WIDI (Optional) indicator in the
center of the interface flashes slowly 3 times, then release it. The WIDI
Core Bluetooth module will be manually reset to the factory default
state.
- When the U4MIDI WC is powered on, press and hold the button for 3
seconds and then release it, and the Bluetooth role of the WIDI Core
module will be manually set to "Force Peripheral" mode (this mode is
used to connect to a computer or mobile phone). If your WIDI Core
has previously connected to other Bluetooth MIDI devices, this will
disconnect all Bluetooth connections.
WIDI (Optional) and WIDI INPUT/OUTPUT Bluetooth MIDI
indicators
When the WIDI Core module is not installed, these three indicators are
off. When the WIDI Core module is installed, the WIDI (Optional) indicator
status is as follows:
WIDI (Optional) indicator
- Slow flashing dark blue: Bluetooth MIDI has started normally and is
waiting to connect.
- Solid dark blue: the WIDI Core is connected to another Bluetooth MIDI
central as a Bluetooth MIDI peripheral role.
- Light blue (turquoise): the WIDI Core is connected to other Bluetooth
MIDI peripherals as a Bluetooth MIDI central role.
- Solid green: the WIDI Core is in firmware upgrade mode, please use
the WIDI App (iOS or Android) to upgrade the firmware (Please visit:
Bekijk gratis de handleiding van CME U4MIDI WC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CME |
| Model | U4MIDI WC |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2868 MB |
