CME MIDI Thru5 handleiding
Handleiding
Je bekijkt pagina 5 van 26
5 / 26
2. Button
This button has no effect when the optional Bluetooth MIDI
module is not installed.
Note: After installing the optional WIDI Core Bluetooth MIDI
module, certain shortcut operations are available. First, please
confirm that the WIDI Core firmware has been upgraded to the latest
version. The following operations are based on WIDI v0.1.4.7 BLE
firmware version or higher:
When the MIDI Thru5 WC is not powered on, press and
hold the button and then power on the MIDI Thru5 WC until
the LED light located in the center of the interface flashes
slowly 3 times, then release. The interface will be manually
reset to the factory default state.
When the MIDI Thru5 WC is powered on, press and hold
the button for 3 seconds and then release it, the Bluetooth
role of the interface will be manually set to the "Force
Peripheral" mode (this mode is used to connect to a
computer or mobile phone). If the interface has previously
been connected to other Bluetooth MIDI devices, this
action will disconnect all connections.
3. 5-pin DIN MIDI Socket
IN: One 5-pin MIDI IN socket is used to connect the MIDI
OUT or MIDI THRU port of standard MIDI device to receive
MIDI messages.
THRU: Five 5-pin MIDI THRU sockets are used to connect
to the MIDI IN port of standard MIDI devices, and forwards
Bekijk gratis de handleiding van CME MIDI Thru5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | CME |
| Model | MIDI Thru5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2109 MB |
