Cleveland 24CGA10 handleiding
Handleiding
Je bekijkt pagina 19 van 40
13
b. Timer Operation
1). Setting the Timer
• Timer must be zeroed (Press the CLEAR key to zero the timer)
• Timer can be set only when cooking time display is clear (00:00)
• Cooking time display contains four digits
– Left two digits are minutes
– Right two digits are seconds.
• The display 12:34 is set for 12 minutes and 34 seconds.
2). To set cooking time:
a) Calculate required cooking time in minutes and seconds.
b) Press number keys for minutes and then for seconds.
c) If the cooking time is 99 seconds or less only press the number keys for seconds.
3). Starting/Stopping Timer
Press START/STOP key to start or stop timer
When START/STOP key is pressed steam generator begins heating water
Steam fills the cooking compartment.
a) Timer display reads “PAUS”
until the cooking compartment reaches proper cooking temperature
when timer cycle is paused by pressing the START/STOP key again after timer
has started
b) When cooking compartment reaches proper cooking temperature timer display shows
count down
Example: A timer setting of 10 minutes may take 11 or 12 minutes for timer to countdown and
alarm to sound. This is normal. Heating compartment and food to cooking temperature
uses additional time.
4). Shutting Off Alarm
(a) When timer counts down to zero:
• alarm sounds continuously
• generator stops steaming
• steam flow to cooking compartment gradually stops
(b) Press the START/STOP key to silence the alarm
(c) Cooking time display returns to last time set
(d) Either run same setting again or clear and reset timer
Bekijk gratis de handleiding van Cleveland 24CGA10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleveland |
| Model | 24CGA10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3358 MB |
