Cleco TULMan 240461PT handleiding
Handleiding
Je bekijkt pagina 16 van 30
Quick Guide to Programming
© 2016 APEX TOOL GROUP 16
1. On the settings tab select Cycle or Runtime
• Use Cycle for torque controlled Screwdrivers with clutches
• Use Runtime for varying cycle time tools such as Drills, Sanders
2. In Cycle mode additional settings can be used for a more accurate
cycle count, these are NOT used with Runtime. Refer to the examples
in the Software or in Appendix. Consult the tool manufacturer or use
previous data to establish warnings and limits for the Calibration and
Maintenance setting. It is recommended that the warning is at least
one shift before the limit
3. In Runtime mode time should be input in seconds. Consult the tool
manufacturer or use previous data to establish warnings and limits for
the Calibration and Maintenance setting. It is recommended that the
warning is at least one shift before the limit. For hours to seconds
conversion see Appendix Runtime Calculator
Bekijk gratis de handleiding van Cleco TULMan 240461PT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleco |
| Model | TULMan 240461PT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8243 MB |
