Cleco NeoTek T55-3000019 handleiding
Handleiding
Je bekijkt pagina 9 van 32
Apex Tool Group P2399MA | 2019-06 9
1
EN
1 Product description
As an accessory for NeoTek tools, the 2D Reader allows the scanning of barcodes.
2 Use
3 Installation
30/50/70ESN(…), 30/50/70EAN(…)
• First accessory: see Figure 01, Page 3
• Second accessory (optional): see Figure 02, Page 3
30/50EPN(…)
• First accessory: see Figure 03, Page 4
• Pistol suspension bail (optional): see Figure 04, Page 4
4 Activating accessories
To activate accessories via the controller:
Select Navigator > Communications > Part ID > Part ID Source > Tool Scanner.
For additional settings, see the particular software documentation for the controller.
2D Reader
Order No.
937731PT 942391PT 942394PT T55-
3000018
T55-
3000019
Requirements
NeoTek tool 30 Series...,
50EAN30-
FA3
50 Series...
except
50EAN30-
FA3
70 Series... 30 Series... 50 Series...
Angle head,
inline
Angle head,
inline
Angle head,
inline
Pistol Pistol
Software requirements 2D reader: S169352-101 or later
Bootloader: S169353-101 or later
Controller: e.g., S168813-1.8.1 or later
Measurement card: S168025-507 or later
TIM (Tool Interface Module): 3.4
Note
Note the order of the software updates:
1. Perform controller software update.
2. Perform measurement card firmware update.
3. Perform TIM firmware update.
4. Perform firmware update for accessories.
Note
Before installing, take the tool out of operation or switch off the controller.
Bekijk gratis de handleiding van Cleco NeoTek T55-3000019, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleco |
| Model | NeoTek T55-3000019 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2963 MB |
