Cleco DGD 946823D7 handleiding
Handleiding
Je bekijkt pagina 7 van 54
7
P1713E-EN
2013-12
EN
1.5 Intended use
The owner is responsible for using the machine according to its designated use.
The fastening system may be used only under the following conditions:
• Do not operate the fastening system outdoors.
• Industrial environment EMC limit class value A, DIN EN 55 0081-2.
• The built-in nutrunner is designed for stationary operation only and is intended exclusively for fastening
and loosening thread connections. Do not use as a hand-held tool.
• Use the built-in nutrunner only in combination with a nutsetter control unit from Apex Tool Group.
• The built-in nutrunner must be fully assembled. Insert and lock all connecting cables.
• Secure the built-in nutrunner to an electro conductive mounting plate.
• Only cable types and accessory parts approved by Apex Tool Group may be used.
• Unauthorized alterations, repairs and modifications are prohibited for reasons of safety and product lia-
bility.
1.6 Ambient conditions
Do not operate the fastening system in an explosive atmosphere
1.7 EMC
• The tool complies with the following applicable EMC standards:
- DIN EN 61 000-3-2
- DIN EN 61 000-3-3
- DIN EN 61 000-6-2
- DIN EN 61 000-6-4
• The filters required to fulfill the EMC standards are integrated in the system components.
• Shielded cables offer protection against irradiating and radiating interference.
• All cable shields are connected to the shield terminals on the nutsetter control unit and the plug casing
on the built-in nutrunner.
System components
Enclosure type
according to
DIN 40050
Ambient tem-
perature
Relative
humidity
Working
height
Built-in nutsetter IP40 32 to 113 °F
(0…45 °C)
0 to 90 % no con-
densation
Up to 3000 m
above sea
level
Motor IP54
Gear IP40
Transducer IP40
Attachment IP40
Nutrunner control IP54
Station controller
mPro400…
IP54
1)
1) Observe Derating
STM12/34 IP20 32 to 158 °F
0…70 °C
Equipment from EMC limit class value A, DIN EN 55 0081-2.
This equipment may cause radio interference in residential areas. Should this occur, you may request
that the operator pay for and implement relevant EMC measures.
Bekijk gratis de handleiding van Cleco DGD 946823D7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleco |
| Model | DGD 946823D7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5397 MB |
