Cleco DGD 946823D7 handleiding
Handleiding
Je bekijkt pagina 5 van 54
5
P1713E-EN
2013-12
EN
1 Safety
1.1 Warnings and notes
1.2 Basic requirements for safe working practices
Take the fastening system into service only after you have read and completely understood the following
safety instructions and this document. Failure to observe the instructions below may result in electric shock,
fire and serious injuries.
DANGER!
A symbol combined with the word DANGER warns of an impending health risk or risk of fatal injury to
personnel. If this danger note is not adhered to, severest injury that may lead to the death of people, is
the consequence.
WARNING!
A symbol combined with the word WARNING warns of a potentially dangerous situation for the health
of personnel, which could result in death or serious injury if not avoided.
CAUTION!
A symbol combined with the word CAUTION warns of a potentially harmful situation for the health of
personnel or damage to property or the environment. If this warning is not observed, injuries, property
or environmental damage may occur.
This sign warns of a possibly damaging situation.
If the note is not adhered to, the product or parts of it may be damaged.
This symbol indicates a general instruction.
General instructions include application tips and special useful information, but no warnings against
dangers.
WARNING!
High leakage current –
Fatal electric shock could occur!
Always disconnect the power supply before performing maintenance work on the built-in nutrunner and
the nutsetter control.
Always disconnect the system cable, motor or motor cable from the
nutsetter control or built-in nutrunner before making throughput, resistance and short circuit measure-
ments.
Do not attempt to repair possible faults on the fastening system by yourself if you do not have the
required knowledge! Inform the local repair center or your Sales & Service Center.
Establish a grounding connection (PE) to the nutrunner control before taking into operation!
CAUTION!
High temperature –
the motor on the built-in nutrunner may heat up and cause burns during removal.
(max. engine temperature 90 °C).
Wear gloves.
ATTENTION
!
Bekijk gratis de handleiding van Cleco DGD 946823D7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Cleco |
| Model | DGD 946823D7 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5397 MB |
